JUNIPER CTP2056-AC-03 ROUTER

$20,167 $28,810

Properties

Properties Juniper CTP2056-AC-03
Description CTP2056 AC base chassis
Product Family CTP Series
Product Type Router
Serial Interfaces
EIA-530, RS-232/V.28, RS-422/V.11, RS-423/V.10, X.21, V.35, T1, E1 Yes
IRIG-B Yes
Encoding NRZ, Conditioned Diphase, Isochronous, Asynchronous, AMI, B8ZS, HDB3, TDM/TDC, Transparent Yes
Interface quantity 56
Rates 50 bps–12.880 Mbps
Voice Interfaces
Analog voice 4-wire TO interface quantity 56
4WE&M 48
2WFXS 144
2WFXO 72
T1 and E1 56
Companding conversion Yes
IP Interfaces
10/100/1000BASE-T (RJ-45) 2
SFP 1000BASE-T 4
SFP 1000BASE-SX 4
SFP 1000BASE-LX 4
Precedent setting—(DSCP), configurable TOS byte Yes
VLAN tagging Yes
Virtual IP Yes
Circuit modes—symmetric, asymmetric, unidirectional, hairpin Yes
IPv4 and IPv6 Yes
IETF PWE3 RFC SAToP Yes
IETF PWE3 RFC CESoPSN Yes
Layer 2 serial aggregation Yes
Port mirroring Yes
*Software support roadmap item
Dimension (WxHxD) 17.25 x 7.0 x 11.75 in (43.8 x 17.8 x 29.8 cm)
Weight (lb) 27
Mounting Front Rack
Input voltage (AC) 100-240 VAC
Power supply 250W x 2
Input current 2.5 A at 110 VAC

Specifications

Specifications CPT2056-AC-03
Operating temperature 32° to 104° F (0° to 40° C)
Humidity 5%-90% RH noncondensing
Platform Features
Software circuit provisioning EIA530, RS-232, V.35, 4WTO, T1, and E1 circuit types are software configured including the line encoding, clocking, rates, and IP settings.
Scalable product family A family of four CTP Series Circuit to Packet Platforms provides different port densities. Products can address the requirements of small remote sites through large central network hubs.
CTPView Network Management System Secure, multi-user, web-based network management system provides network monitoring, circuit provisioning, IP performance reporting, database backup, and circuit troubleshooting tools.
Multiple system and circuit clocking solutions CTP Series Circuit to Packet Platforms are designed to use multiple external clocks as monitored and prioritized system references.

Circuits are configured to use the system clock, external circuit timing, or to adaptively recover clock information from the remote port when required by the application or when no reference is configured.
Auto switch The status of the CTP Series circuit ports is monitored, and the circuit is automatically switched to an alternate local or remote port when a failure is detected.
Packet protector Redundant packets are created and transmitted to the IP network and then processed by the receiving CTP Series.
Autobaud The input timing leads are monitored, and the circuit rate is automatically changed at both ends of the network if a rate change is detected.
Loops and BERTs Each CTP Series port supports interface and network loops and the ability to generate and monitor a bit error rate test with up to nine BERT patterns selectable.
Layer 2 Serial-to-Ethernet IP aggregation The CTP Series Circuit to Packet Platforms can aggregate layer 2 traffic from serial interfaces onto a Fast Ethernet or Gigabit Ethernet interface. Layer 2 protocols supported are Frame Relay, PPP and Cisco-HDLC. Each CTP Series port is connected to a different VLAN.
Port mirroring The CTP Series is able to port-mirror any transmit or any receive up to 10 local or remote destinations.
Analog voice—4WE&M The CTP Series supports analog 4WE&M type I, II,and V interfaces with software selectable transmit and receive-level adjustments per interface.
Analog voice—2WFXS The CTP Series supports analog 2WFXS loop start, ground start, and PLAR modes with software selectable transmit and receive-level adjustments per interface.
Analog voice—2WFXO The CTP Series support analog 2WFXO loop start and ground start modes with software selectable transmit and receive-level adjustments per interface.
IRIG-B The CTP Series supports an inter-range instrumentation group time code (IRIG-B) signal to be transported through an IP network. IRIG-B encodes day of year, hour, minute, and second data on a 1-KHz carrier frequency, with an update rate of once per second.
Primary Circuit to Packet Solutions
SS7 transport over IP Provides transport of dedicated T1 or E1 SS7 links over the IP/ MPLS network.
TDM over IP solution The provisioning of point-to-point TDM trunks over the IP network does not require changes to the TDM equipment.
PBX interconnect over IP solution Provides E1 and T1 trunking for PBX interconnection over the IP network.
PBX Extension over IP with 2WFXS/2WFXO Provides two-wire analog PBX to phone extensions over IP and two-wire PBX to PBX/central office connections over IP. Private- line automatic ringdown (PLAR) is also supported.
Leased line extension over IP solution Supports standards-based encapsulation and DS0 bundling. IETF PWE3 RFCs, SAToP and CESoPSN are supported.
Radio over IP solution Allows for connectivity of analog and digital radios over IP networks.
Serial encryption over IP solution Provides transport of KG/KIV bit-synchronous cipher text across an IP network.
T1 and E1 backup over IP Point-to-point T1 or E1 circuits can be automatically backed up over the IP/MPLS network.

Accessories

Upgrades
CTP-Fiber-PMC Fiber PMC card for CTP2000 line to support up to 2 SFP modules
CTP-SFP-1GE-T Small form-factor pluggable 1000BASE-T Gigabit Ethernet module (uses Cat 5 cable)
CTP-SFP-1GE-SX Small form -factor pluggable 1000BASE-SX Gigabit Ethernet optic module
CTP-SFP-1GE-LX Small form-factor pluggable 1000BASE-LX Gigabit Ethernet optic module
Interface Modules
CTP2000-IM-8P-T1E1 8-port T1/E1 RJ48 interface module
CTP2000-IM-8P 8-port serial interface module—EIA530/V.11/RS- 422/X.21, RS-232/V.24, V.35
CTP2000-IM-8P-MS 8-port serial interface module—EIA530/V.11/RS- 422/X.21, RS-232/V.24, V.35, 4TWO, HQ Analog, IRIG
CTP2000-IM-4WEM 8-port 4WE&M analog voice module
4WEM-RTM 8-port 4WE&M 8-port rear transition module
CTP2000-IM-2WFXS 24-port 2WFXS analog voice module
2WFXS-RTM 24-port 2WFXS rear transition module
CTP2000-IM-2WFXO 12-port 2WFXO analog voice module
2WFXO-RTM 12-port 2WFXO rear transition module
Spares
CTP2000-PRC-S Processor spare
CTP2000-RTC-S Rear transition module spare
CTP2000-PWR-R CTP2024/CTP2056 redundant power supply option
CTP2056-REC-RMK CTP2056 recessed rack mount kit
CTP-CBL-4Q Cable—100 pin to four (4) DB-25 DCE for CTP2000 line
CTP-CBL-4Q-DTE Cable—100 pin to four (4) DB-25 DTE for CTP2000 line

Domestic Shipping

All products from Gaia Consulting Services are shipped Monday through Friday via trusted carriers such as UPS, FedEx, or USPS. We are pleased to offer free delivery on all orders over $100 within the United States. Orders typically take 1-6 business days to arrive, depending on your location. For orders that do not qualify for free delivery, shipping rates are calculated based on factors such as the shipping carrier, method, package weight, and destination. Please note that additional surcharges may apply for shipments to Hawaii, Alaska, Puerto Rico, and APO/FPO addresses. While we strive to ship orders on the same day they are placed, any delays or cancellations will be promptly communicated to you.

International Shipping

Gaia Consulting Services also offers international shipping to customers worldwide. However, please be aware that we adhere to all international trade laws and regulations and do not ship to countries currently under embargo by the United States.

Shipping Carriers and Transit Times

For international shipments, we utilize reliable carriers such as UPS, FedEx, and DHL to ensure your orders arrive safely and on time. Transit times typically range between 7-15 business days, depending on the destination and chosen shipping method. Please note that customs clearance processes may cause delays, which are beyond our control.

Customs, Duties, and Taxes

Customers outside the United States are responsible for any customs duties, taxes, or additional fees imposed by their country's customs authorities. Gaia Consulting Services cannot predict or control these charges and advises customers to familiarize themselves with their country's import regulations before placing an order. Please note that these charges are not included in the item price or shipping costs.

Order Processing

We strive to process and ship orders quickly and efficiently. If any issues arise with your order, we will notify you promptly to keep you informed of its status.

Shipping Addresses

To ensure smooth delivery, please provide an accurate and complete shipping address during checkout. Gaia Consulting Services cannot be held liable for orders shipped to incorrect addresses due to customer error. If you need to modify your shipping address after placing an order, please contact us immediately. Please note that we may be unable to change the shipping address if your order has already been processed.

You may also like