JUNIPER SRX320-SYS-JE-P FIREWALL
$1,560
$3,120
Description:
- RX320 Services Gateway
- with Junos Software Enhanced
- 8GE
- 6 x POE+
- 2 x MPIM slot
- 4G RAM
- 8G Flash
- Routing & switching
- Application Security
- MPLS
- IPSec
- NAT
- Firewall
- RMK not included
Properties
Properties | Juniper SRX320-SYS-JE-P |
Description | SRX320 Firewalls includes hardware (8GbE, 6-port POE+, 2x MPIM slots, 4G RAM, 8G Flash, power adapter and cable) and Junos Software Enhanced (Firewall, NAT, IPSec, Routing, MPLS, Switching and Application Security). RMK not included. |
Product Family | SRX300 Series |
Product Type | Security Firewall |
Connectivity Specification | |
Total onboard ports | 8x1GbE |
Onboard RJ-45 ports | 6x1GbE |
Onboard small form-factor pluggable (SFP) transceiver ports | 2x1GbE |
MACsec-capable ports | 2x1GbE |
Out-of-band (OOB) management ports | 0 |
Mini PIM (WAN) slots | 2 |
Console (RJ-45 + miniUSB) | 1 |
USB 3.0 ports (type A) | 1 |
PoE+ ports | 6 |
Includes | Junos Software Enhanced (Firewall, NAT, IPSec, Routing, MPLS, Switching and Application Security) |
Form factor | Desktop |
Dimensions (WxHxD) | 11.81 x 1.73 x 7.52 in. (29.99 x 4.39 x 19.10 cm) |
Weight (device and PSU) | 3.4 lb (1.55 kb) |
Power | |
Power supply | AC (external) |
Redundant PSU | No |
Rated DC voltage range | N/A |
Rated DC operating voltage range | N/A |
Maximum PoE power | 180 W |
Average power consumption | 221 W |
Average heat dissipation | 755 BTU/h |
Maximum current consumption | 2.755 A |
Airflow/cooling | Front to back |
Acoustic noise level | 40 Dba |
Specifications
Specifications | SRX320-SYS-JE-P |
System memory (RAM) | 4 GB |
Storage | 8 GB |
SSD slots | 0 |
Firewall performance (max) | 1 Gbps |
IPS performance | 100 Mbps |
AES256+SHA-1 / 3DES+SHA-1 VPN performance | 250 Mbps |
New sessions/second (sustained, TCP, 3-way) | 5000 |
Routing with packet mode (64 B packet size) in Kpps | 300 |
Routing with packet mode (IMIX packet size) in Mbps | 800 |
Routing with packet mode (1,518 B packet size in Mbps | 1,500 |
Stateful firewall (64 B packet size) in Kpps | 200 |
Stateful firewall (IMIX packet size) in Mbps | 600 |
Stateful firewall (1,518 B packet size) in Mbps | 1,900 |
IPsec VPN (IMIX packet size) in Mbps | 116 |
IPsec VPN (1,400 B packet size) in Mbps | 336 |
Application visibility and control in Mbps | 500 |
Recommended IPS in Mbps | 200 |
Next-generation firewall in Mbps | 226 |
Secure Web Access firewall in Mbps | 171 |
Route table size (RIB/FIB) (IPv4 or IPv6) | 256,000/256,000 |
Maximum concurrent sessions (IPv4 or IPv6) | 64,000 |
Maximum security policies | 1,000 |
Connections per second | 5,000 |
NAT rules | 1,000 |
MAC table size | 15,000 |
IPsec VPN tunnels | 256 |
Number of remote access/SSL VPN (concurrent) users | 50 |
GRE tunnels | 256 |
Maximum number of security zones | 16 |
Maximum number of virtual routers | 32 |
Maximum number of VLANs | 1,000 |
AppID sessions | 16,000 |
IPS sessions | 16,000 |
URLF sessions | 16,000 |
WAN and Wi-Fi Interface Support | |
1 port T1/E1 MPIM (SRX-MP-1T1E1-R) | Yes |
1 port VDSL2 Annex A/M MPIM (SRX-MP-1VDSL2-R) | Yes |
4G / LTE MPIM (SRX-MP-LTE-AA and SRX-MP-LTE-AE) | Yes |
802.11ac Wave 2 Wi-Fi MPIM | Yes |
WAN and Wi-Fi Interface Module Performance Data | |
4G/LTE: Dual SIM 4G/LTE-A CAT 6 | Up to 300 Mbps download and 50 Mbps upload |
Wi-Fi MPIM: Dual band 802.11 a/b/g/n/ac Wave 2 (2x2 MIMO) | Up to 866 Mbps at 5GHz / 300 Mbps at 2.4GHz |
Software Specifications | |
Routing Protocols | IPv4, IPv6, ISO, Connectionless Network Service (CLNS) Static routes RIP v1/v2 OSPF/OSPF v3 BGP with Route Reflector IS-IS Multicast: Internet Group Management Protocol (IGMP) v1/v2, Protocol Independent Multicast (PIM) sparse mode (SM)/dense mode (DM)/source-specific multicast (SSM), Session Description Protocol (SDP), Distance Vector Multicast Routing Protocol (DVMRP), Multicast Source Discovery Protocol (MSDP), Reverse Path Forwarding (RPF) Encapsulation: VLAN, Point-to-Point Protocol (PPP), Frame Relay, High-Level Data Link Control (HDLC), serial, Multilink Point-to-Point Protocol (MLPPP), Multilink Frame Relay (MLFR), and Point-to-Point Protocol over Ethernet (PPPoE) Virtual routers Policy-based routing, source-based routing Equal-cost multipath (ECMP) |
QoS Features | Support for 802.1p, DiffServ code point (DSCP), EXP Classification based on VLAN, data-link connection identifier (DLCI), interface, bundles, or multifield filters Marking, policing, and shaping Classification and scheduling Weighted random early detection (WRED) Guaranteed and maximum bandwidth Ingress traffic policing Virtual channels Hierarchical shaping and policing |
Switching Features | ASIC-based Layer 2 Forwarding MAC address learning VLAN addressing and integrated routing and bridging (IRB) support Link aggregation and LACP LLDP and LLDP-MED STP, RSTP, MSTP MVRP 802.1X authentication |
Firewall Services | Stateful and stateless firewall Zone-based firewall Screens and distributed denial of service (DDoS) protection Protection from protocol and traffic anomaly Integration with Pulse Unified Access Control (UAC) Integration with Aruba Clear Pass Policy Manager User role-based firewall SSL Inspection (Forward-proxy) |
Network Address Translation (NAT) | Source NAT with Port Address Translation (PAT) Bidirectional 1:1 static NAT Destination NAT with PAT Persistent NAT IPv6 address translation |
VPN Features | Tunnels: Site-to-Site, Hub and Spoke, Dynamic Endpoint, AutoVPN, ADVPN, Group VPN (IPv4/ IPv6/ Dual Stack) Juniper Secure Connect: Remote access / SSL VPN Configuration payload: Yes IKE Encryption algorithms: Prime, DES-CBC, 3DES-CBC, AEC-CBC, AES-GCM, SuiteB IKE authentication algorithms: MD5, SHA-1, SHA-128, SHA-256, SHA-384 Authentication: Pre-shared key and public key infrastructure (PKI) (X.509) IPsec (Internet Protocol Security): Authentication Header (AH) / Encapsulating Security Payload (ESP) protocol IPsec Authentication Algorithms: hmac-md5, hmac-sha-196, hmac-sha-256 IPsec Encryption Algorithms: Prime, DES-CBC, 3DES-CBC, AEC-CBC, AES-GCM, SuiteB Perfect forward secrecy, anti-reply Internet Key Exchange: IKEv1, IKEv2 Monitoring: Standard-based dead peer detection (DPD) support, VPN monitoring VPNs GRE, IP-in-IP, and MPLS |
Network Services | Dynamic Host Configuration Protocol (DHCP) client/server/relay Domain Name System (DNS) proxy, dynamic DNS (DDNS) Juniper real-time performance monitoring (RPM) and IP-monitoring Juniper flow monitoring (J-Flow)1 Bidirectional Forwarding Detection (BFD) Two-Way Active Measurement Protocol (TWAMP) IEEE 802.3ah Link Fault Management (LFM) IEEE 802.1ag Connectivity Fault Management (CFM) |
High Availability Features | Virtual Router Redundancy Protocol (VRRP) Stateful high availability Dual box clustering Active/passive Active/active Configuration synchronization Firewall session synchronization Device/link detection In-Band Cluster Upgrade (ICU) Dial on-demand backup interfaces IP monitoring with route and interface failover |
Management, Automation, Logging, and Reporting |