JUNIPER QFX10002-60C SWITCH

$145,299 $207,570

Description

The QFX10000 line of modular data center spine and core Ethernet switches delivers industry-leading scale, flexibility and openness, with a design that enables the seamless transition from 10GbE and 40GbE interface speeds to 100GbE. These high- performance, forward-looking switches are designed to help cloud and data center operators extract maximum value and intelligence from their network infrastructure well into the future.

Properties

Properties Juniper QFX10002-60C
Description QFX10002 system with 60-port 100GbE QSFP28 / 60-port
40GbE QSFP+ / 192-port 10GbE SFP+ with 4 1600 W AC
power supplies, 4 power cables and 3 fan trays
Product Family QFX10002 Series
Product Type Ethernet Switch
Port Densities
Maximum 10GbE port density 192 SFP+
Maximum 40GbE port density 60 QSFP+
Maximum 100GbE port density 60 QSFP28
Management and Precision Time Protocol (PTP) interfaces 1 small form-factor pluggable transceiver (SFP/SFP +) port for PTP Grandmaster
Fiber (SFP) or 10/100/1000BASE-T (RJ-45) Ethernet management port
SMB In, SMB Out, 10 MHz In, 10 MHz Out
One Console port
USB 2.0 storage interface
Operating System Junos OS
Power 4x 1600 AC power supply
Maximum power draw 800 W AC, 2,730 BTU/hr
Typical power draw 560 W AC, 1,911 BTU/hr
Cooling Front-to-back airflow
3 hot-swappable fan modules with redundant fans
Dimensions (HxWxD) Inches 17.4 x 3.46 x 31 in
(44.2 x 8.8 x 78.7 cm)
Rack units 2 U
Weight 80.5 lbs. (36.5 kgs)

Specifications

Specifications QFX10002-60C
System throughput Up to 12 Tbps
Forwarding capacity Up to 4 Bpps
CPU Intel Ivy Bridge 4C/2.3GHz processor
Total packet buffer 24 GB
Latency As low as 2.5 microseconds within a PFE
As low as 5.5 microseconds across PFEs
Media access control (MAC) addresses Up to 1 million
ARP entries Up to 340,000, or 64,000 per PFE
Jumbo frames 9,216 bytes maximum
VLANs 4,000
Forwarding information base (FIB) (IPv4/IPv6) Up to 2 million
Routing Information Base (RIB) (v4) 20 million
Routing Information Base (RIB) (v6) 6 million
Host routes Up to 2 million
ECMP 64-way
IPv4 multicast routes Up to 128,000
IPv6 multicast routes Up to 128,000
Multicast groups Up to 128,000
Filters Up to 8,000
Filter terms Up to 64,000
Policers Up to 8,000
Output queues per port 8
VOQs 192,000 per PFE
LAGs 192
Members per LAG 64
BGP neighbors (Premium Feature License) 1,024
Generic routing encapsulation (GRE) tunnels 3,000
MPLS L3 VPNs (Advanced Feature License) 4,000
LSPs (ingress/ egress/transit) (Advanced Feature License) 4,000
Software Features
Layer 2 Features 802.1D: Spanning Tree Protocol (STP)
802.1w: Rapid Spanning Tree Protocol (RSTP)
802.1s: Multiple Spanning Tree Protocol (MSTP)
VLAN Spanning Tree Protocol (VSTP)
802.1AB Link Layer Discovery Protocol (LLDP)
VLAN Registration Protocol
QinQ
Link Aggregation 802.3ad: Link Aggregation Control Protocol (LACP)
MC-LAG
Layer 3 Features Static routing
RIP v1/v2
OSPF v1/v2
OSPF v3
Filter-based forwarding
Virtual Router Redundancy Protocol (VRRP)
IPv6
Bidirectional Forwarding Detection (BFD)
Virtual routers
Unicast RPF (uRPF)
Loop-free alternate (LFA)
BGP
IS-IS
Dynamic Host Configuration Protocol (DHCP) v4/v6 relay
VR-aware DHCP
IPv4 / IPv6 over GRE tunnels (interface-based)
Multicast Internet Group Management Protocol (IGMP) v1/v2/v3
Multicast Listener Discovery (MLD) v1/v2
IGMP Proxy, Querier
IGMP snooping
MLD snooping
Protocol Independent Multicast PIM-SM, PIM-SSM, PIM-DM
Multicast Source Discovery Protocol (MSDP)
Multicast only Fast Re-Route (MoFRR)
NG-MVPN
Firewall Filters Ingress and egress L2-L4 access control lists (ACLs)
- Port ACLs
- VLAN ACLs
- Router ACLs
Control plane denial-of-service (DoS) protection
Quality of Service (QoS) Single rate three color policer
Two rate three color policer
Congestion prevention
- Weighted random early detection (WRED)
- Tail drop
- ECN marking
Priority-based scheduling
- Low latency queuing with strict high priority
- Weighted round-robin (WRR) queuing
Data Center Bridging Quantized Congestion Notification
CoS-based forwarding
MPLS (Advanced Feature License) LDP
RSVP
LDP tunneling (LDP over RSVP)
Fast reroute (FRR)
IPv6 tunneling (6PE)
Ingress, transit, and Egress LSPs
IPv4 Layer 3 VPNs
IPv6 Layer 3 VPNs (6VPE)
Layer 2 circuits
MPLSoUDP
Segment routing
Overlays Integration with Juniper Networks Contrail
Integration with VMware NSX SDN controller
VXLAN
Open vSwitch Database (OVSDB)
VXLAN L2 Gateway
VXLAN L3 Gateway
Ethernet VPN (EVPN)-VXLAN
EVPN multihoming
High Availability GRES
BFD
Timing Precision Timing Protocol (PTP)
- Transparent Clock
- Boundary Clock
Visibility Switched Port Analyzer (SPAN)
Remote SPAN (RSPAN)
Encapsulated Remote SPAN (ERSPAN)
Firewall filter-based port mirroring
sFlow v5
IPFIX
Data Center Bridging Priority-based flow control (PFC)IEEE 802.1Qbb
Data Center Bridging Exchange Protocol (DCBX), DCBx FCoE,
and iSCSI type, length, and value (TLVs)
Management and Operations Contrail Networking
Zero-Touch Provisioning (ZTP)
Streaming telemetry
Junos Space Network Director
Junos OS CLI via console, telnet, SSH
Out-of-band management: Serial; 10/100/1000BASE-T
Ethernet
Role-based CLI management and access
Junos XML management protocol
ASCII configuration file
SNMP v1/v2/v3
RADIUS
TACACS+
Extensive MIB support
Junos OS configuration rescue and rollback
Image rollback
OpenStack Neutron Plug-in
Puppet
Chef
Python
Junos OS event, commit, and OP scripts
RMON (RFC 2819): Groups 1, 2, 3, 9
Network Time Protocol (NTP)
SSHv2
Secure copy
DNS resolver
System logging
Environment monitoring
Temperature sensor
Configuration backup via FTP/secure copy
IEEE 802.3ah Link Fault Management (LFM)
Troubleshooting Debugging: CLI via console, telnet, or SSH
Diagnostics: Show, debug, and statistics commands
Port mirroring:
- Local
- Remote
IP tools: Extended ping and trace
Juniper Networks commit and rollback
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -40° to 158° F (-40° to 70° C
Operating altitude Up to 10,000 ft. (3,048 m)
Relative humidity operating 5 to 90% (noncondensing)
Relative humidity nonoperating 5 to 95% (noncondensing)
Seismic Designed to meet GR-63, Zone 4 earthquake requirements
Safety CAN/CSA-C22.2 No. 60950-1 Information Technology
EquipmentSafety
UL 60950-1 Information Technology EquipmentSafety
EN 60950-1 Information Technology EquipmentSafety
IEC 60950-1 Information Technology EquipmentSafety (All
country deviations)
EN 60825-1 Safety of Laser ProductsPart 1: Equipment
Classification
Electromagnetic Compatibility 47CFR Part 15, (FCC) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
EN 55024
CISPR 24
EN 300 386
VCCI Class A
AS/NZA CISPR22 Class A
KN22 Class A
CNS 13438 Class A
EN 61000-3-2
EN 61000-3-3
ETSI
ETSI EN 300 019: Environmental Conditions & Environmental
Tests for Telecommunications Equipment
ETSI EN 300 019-2-1 (2000)Storage
ETSI EN 300 019-2-2 (1999)Transportation
ETSI EN 300 019-2-3 (2003)Stationary Use at Weatherprotected Locations
ETSI EN 300 019-2-4 (2003)Stationary Use at NonWeather-protected Locations
ETS 300753 (1997)Acoustic noise emitted by
telecommunications equipment

Accessories

Accessories
JPSU-1600W-AC-AFO QFX10002 1600 W AC power supply
JNP10002-FAN1 Fan for JNP10002-60C
JNP10002-60C-CHAS JNP system with 60-port 100GbE QSFP28 / 60-port 40GbE QSFP+ / 192-port 10GbE SFP+, chassis only
Pluggable Optics
JNP-QSFP-100G-SR4 QSFP28 100GBASE-SR4 optics for up to 100 m transmission
over parallel multimode fiber-optic (MMF)
JNP-QSFP-100G-LR4 QSFP28 100GBASE-LR4 optics for up to 10 km transmission
over serial single-mode fiber-optic (SMF)
JNP-QSFP-100G-PSM4 QSFP28 100GBASE-PSM4 optics for up to 2 km transmission
over parallel SMF
JNP-QSFP-100G-CWDM QSFP28 100GBASE-CWDM4 optics for up to 2 km transmission
over serial SMF
JNP-QSFP28-AOC-10M 100GbE QSFP28 to QSFP28 active optical cables, 10 m
JNP-QSFP-40GE-IR4 QSFP+ 40GBASE-IR4 40 gigabit optics, 1,310 nm for up to 2 km transmission on SMF
JNP-QSFP-40G-LR4 QSFP+ 40GBASE-LR4 40 gigabit optics, 1,310 nm for up to 10 km transmission on SMF
JNP-QSFP-40G-LX4 QSFP+ 40GBASE-LX4 40 gigabit optics, 100 m (150 m) with OM3 (OM4) duplex MMF fiber
JNP-QSFP-4X10GE-IR QSFP+ 40GBASE optics, up to 1.4 km transmission on parallel single mode (4X10GbE long reach up to 1.4 km)
JNP-QSFP-4X10GE-LR QSFP+ 40GBASE optics, up to 10 km transmission on parallel single mode (4X10GbE long reach up to 10 km)
QFX-QSFP-40G-ESR4 QSFP+ 40GBASE-ESR4 40 gigabit optic. 300 m (400 m) with OM3 (OM4) MMF
QFX-QSFP-40G-SR4 QSFP+ 40GBASE-SR4 40 gigabit optics, 850 nm for up to 150 m transmission on MMF
JNP-QSFP-DAC-10MA QSFP+ to QSFP+ Ethernet direct attach copper (DAC) (twinax copper cable) 10 m active
JNP-QSFP-DAC-7MA QSFP+ to QSFP+ Ethernet DAC (twinax copper cable) 7 m active
JNP-QSFP-DAC-5M QSFP+ to QSFP+ Ethernet DAC (twinax copper cable) 5 m passive
JNP-QSFP-DAC-5MA QSFP+ to QSFP+ Ethernet DAC (twinax copper cable) 5 m active
QFX-QSFP-DAC-3M QSFP+ to QSFP+ Ethernet DAC (twinax copper cable) 3 m passive
QFX-QSFP-DAC-1M QSFP+ to QSFP+ Ethernet DAC (twinax copper cable) 1 m passive
JNP-QSFP-DACBO-10M QSFP+ to SFP+ 10-Gigabit Ethernet direct attach break out copper (twinax copper cable) 10 m
JNP-QSFP-DACBO-7MA QSFP+ to SFP+ 10-Gigabit Ethernet direct attach break out copper (twinax copper cable) 7 m
JNP-QSFP-DACBO-5MA QSFP+ to SFP+ 10-Gigabit Ethernet direct attach break out copper (twinax copper cable) 5 m
QFX-QSFP-DACBO-3M QSFP+ to SFP+ 10-Gigabit Ethernet direct attach break out copper (twinax copper cable) 3 m
QFX-QSFP-DACBO-1M QSFP+ to SFP+ 10-Gigabit Ethernet direct attach break out copper (twinax copper cable) 1 m
QFX-SFP-10GE-ER SFP+ 10GBASE-ER 10-Gigabit Ethernet optics, 1,550 nm for 40 km transmission on SMF
QFX-SFP-10GE-LR SFP+ 10GBASE-LR 10-Gigabit Ethernet optics, 1,310 nm for 10 km transmission on SMF
QFX-SFP-10GE-SR SFP+ 10GBASE-SR 10-Gigabit Ethernet optics, 850 nm for up to 300 m transmission on MMF
QFX-SFP-10GE-USR SFP+ 10-Gigabit Ethernet ultra-short reach optics, 850 nm for 10 m on OM1, 20 m on OM2, 100 m on OM3 multimode fiber
QFX-SFP-DAC-10MA SFP+ 10-Gigabit Ethernet DAC (active twinax copper cable) 10 m
QFX-SFP-DAC-7MA SFP+ 10-Gigabit Ethernet DAC (active twinax copper cable) 7 m
QFX-SFP-DAC-5MA SFP+ 10-Gigabit Ethernet DAC (active twinax copper cable) 5 m
QFX-SFP-DAC-3M SFP+ 10-Gigabit Ethernet DAC (twinax copper cable) 3 m
QFX-SFP-DAC-3MA SFP+ 10-Gigabit Ethernet DAC (active twinax copper cable) 3 m
QFX-SFP-DAC-1M SFP+ 10-Gigabit Ethernet DAC (twinax copper cable) 1 m
QFX-SFP-DAC-1MA SFP+ 10-Gigabit Ethernet DAC (active twinax copper cable) 1 m
QFX-SFP-1GE-LX SFP 1000BASE-LX Gigabit Ethernet optics, 1,310 nm for 10 km transmission on SMF
QFX-SFP-1GE-SX SFP 1000BASE-SX Gigabit Ethernet optics, 850 nm for up to 550 m transmission on MMF
QFX-SFP-1GE-T SFP 1000BASE-T copper transceiver module for up to 100 m transmission on Cat5
Software Feature Licenses
QFX10002-60C-PFL QFX10002-60C Premium Feature License
QFX10002-60C-AFL QFX10002-60C Advanced Feature License
QFX10002-60C-LFIB QFX10002-60C 1 million FIB license

Domestic Shipping

All products from Gaia Consulting Services are shipped Monday through Friday via trusted carriers such as UPS, FedEx, or USPS. We are pleased to offer free delivery on all orders over $100 within the United States. Orders typically take 1-6 business days to arrive, depending on your location. For orders that do not qualify for free delivery, shipping rates are calculated based on factors such as the shipping carrier, method, package weight, and destination. Please note that additional surcharges may apply for shipments to Hawaii, Alaska, Puerto Rico, and APO/FPO addresses. While we strive to ship orders on the same day they are placed, any delays or cancellations will be promptly communicated to you.

International Shipping

Gaia Consulting Services also offers international shipping to customers worldwide. However, please be aware that we adhere to all international trade laws and regulations and do not ship to countries currently under embargo by the United States.

Shipping Carriers and Transit Times

For international shipments, we utilize reliable carriers such as UPS, FedEx, and DHL to ensure your orders arrive safely and on time. Transit times typically range between 7-15 business days, depending on the destination and chosen shipping method. Please note that customs clearance processes may cause delays, which are beyond our control.

Customs, Duties, and Taxes

Customers outside the United States are responsible for any customs duties, taxes, or additional fees imposed by their country's customs authorities. Gaia Consulting Services cannot predict or control these charges and advises customers to familiarize themselves with their country's import regulations before placing an order. Please note that these charges are not included in the item price or shipping costs.

Order Processing

We strive to process and ship orders quickly and efficiently. If any issues arise with your order, we will notify you promptly to keep you informed of its status.

Shipping Addresses

To ensure smooth delivery, please provide an accurate and complete shipping address during checkout. Gaia Consulting Services cannot be held liable for orders shipped to incorrect addresses due to customer error. If you need to modify your shipping address after placing an order, please contact us immediately. Please note that we may be unable to change the shipping address if your order has already been processed.

You may also like