JUNIPER ACX500-AC ROUTER
$6,747
$9,639
Description
JuniperACX500 is a small form factor, hardened fanless router that delivers up to 6 Gbps throughput. It comes with an integrated software-enabled GPS receiver and supports a rich set of security, timing, and synchronization features. Additionally, ACX500 has been certified for indoor and outdoor use for utilities and railways. It is ideal for small cell, LTE-Advanced mobile backhaul deployments, as well as use cases in the industrial environment.
Properties
| Properties | Juniper ACX500-AC |
| Description | ACX500 indoor unit 2x1GbE (SFP) + 4x1GbE (combo) with single AC power supply, 1 U, temperature hardened, passive cooling, rack mounting options, PoE support, Junos OS |
| Product Family | ACX500 Series |
| Product Type | Router |
| Built-In Interface Options | |
| GbE (combo) | 4 (PoE+ support on 3 ports) |
| GbE (SFP) | 2 |
| Console port | RJ-45 connector |
| Management Ethernet port | RJ-45 connector |
| Dimension (WxHxD) | 17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 24 cm) |
| Weight (lb/kg) fully configured | 9.26 lb (4.2 kg) |
| Power | 90-240 V AC |
| Maximum power draw | 65 W + PoE power (80 W) |
| Rack Unit | 1 U |
Specifications
| Specifications | ACX500-AC |
| System Throughput | Up to 60 Gbps |
| Operating temperature | -40° to 149° F (-40° to 65° C) |
| Humidity | 95% RH noncondensing |
| Platform Features | |
| Layer 2 | IEEE 802.3 bridging IEEE 802.1q IEEE 802.1ad (Q-in-Q) VLAN id manipulation for outer/inner: swap/pop/push Rapid Spanning Tree Protocol (RSTP)/VLAN Spanning Tree Protocol (VSTP)/Multiple Spanning Tree Protocol (MSTP) Link Aggregation Control Protocol (LACP) Enhanced load balancing based on L2-L4 header info Link Layer Discovery Protocol (LLDP) Layer 2 bridge protocol data unit (BPDU) tunneling/MAC rewrite |
| Layer 3 | IPv4 IPv6 RPF Equal-cost multipath (ECMP) Enhanced load balancing based on L2-L4 header info OSPF IS-IS BGP Indirect/composite next hop |
| MPLS and Seamless MPLS | RSVP LDP Path Computation Element Protocol (PCEP) RSVP-TE BGP-LU LDP-RSVP RSVP fast reroute (FRR) |
| Services | IEEE 802.3 bridge domain PWE (T-LDP) L2VPN (BGP) Layer 3 VPN Integrated routing and bridging (IRB) Stateless filters L2-L4 |
| Class of Service (CoS) | 8 queues per port with schedulers and shaping Classification based on 802.1p, DiffServ code point(DSCP), IP-precedence, Exp bit Single-rate policer ingress/egress Two-rate three-color policer ingress/egress Per-Port Egress Shaping |
| OAM and SLA Management | Bidirectional Forwarding Detection (BFD) Connectivity fault management (CFM) Y.1731 RFC2544 TWAMP |
| Multicast | Protocol Independent Multicast (PIM) Internet Group Management Protocol (IGMP) IGMP snooping |
| Timing and Sync | BITS/1pps/10MHz 1588v2 BC 1588v2 over IP 1588v2 over Ethernet Synchronous Ethernet Hybrid mode Embedded GM |
| Security | L2 storm control IPsec NAT |
| Configuration, Management and Automation | CLI NETCONF NMP v2/v3 SLAX/Python on-box scripting tools ZTD YANG |
| Safety Approvals | CAN/CSA-C22.2 No. 60950-1 UL 60950-1 EN 60950-1 IEC 60950-1CB Scheme EN 60825-1 |
| EMC | AS/NZS CISPR22 Class A EN55022 Class A VCCI Class A FCC Part 15 Class A IECS-003 Issue 4 BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions KN 22, Class A CISPR 32/EN55032: 2012 European Radiated Emissions Class A EN-61000-4-6 Low Frequency Common Immunity EN-61000-4-11 Voltage Dips and Sags CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) | EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements ETSI EN 300 019-2-1 (2000) Storage, Class T1.2 ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3 ETSI EN 300 019-2-3 (2003) Stationary Use at Weather Protected Locations, Class T3.2 ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| Other EMC Requirements | IEEE 1613 Class 2 Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations IEC 61850-3 Communication networks and systems for power utility automation EN50121-4 Railway applications ETSI EN 300 440-1/-2 GPS spurious emission Deutsche Telekom 1TR9 (2008) EMC Specification British Telecom EMC Immunity Requirements (2007) ITU-T K.21 (2011) Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents ITU-T K.20 (2011) Resistibility of telecommunication equipment installed in telecom centers to overvoltages and overcurrents |
| NEBS | SR-3580 NEBS Criteria Levels (Level 3 Compliance) GR-63-CORE: NEBS, Physical Protection GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant) GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance | Device management: NETCONF, CLI, SNMP v1/v2/v3 End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS) Device and service-level fault management Device and service-level performance management |
| Metro Ethernet Forum (MEF) | MEF CE2.0 compliant |
Accessories
| Accessories | |
| PKG-1U-ACXS | Package Spare for ACX 1RU Chassis |
| RACK-MNT-1RU-19-S | ACX Series 1 RU 19" Mounting Bracket" |
| RACK-MNT-1RU-23-S | ACX Series 1 RU 23" Mounting Bracket" |
| CBL-PWR-C15M-HITEMP-US | Power Cord, AC, C15M |
| Licenses | |
| ACX500-LIC-GPS | ACX500 license to activate GPS receiver |
| ACX500-LIC-SEC | ACX500 license to activate IPsec and NAT features |