PALO ALTO PAN-PA-850 FIREWALL
$12,171.60
Description
Palo Alto PAN-PA-850 Firewall
The PAN-PA-850 is an NGFW that is powered by Machine Learning (ML). This makes it possible to push zero-delay signatures from cloud-based ML while providing signatureless attack identification and immediately preventing never-before-seen file-based attacks. The PAN-PA-850 identifies all traffic irrespective of port, protocol, or encryption, thanks to Full Layer 7 inspection. It also allows you to make policy decisions and traffic-shaping to be made based on application rather than the ports.
Key Features:
- SD-WAN functionality
- Central management with Panorama
- Firewall throughput (HTTP/appmix): 2.0/1.9 Gbps
Properties
| Properties | Palo Alto PAN-PA-850 Firewall |
| Description | The PAN-PA-850 is an NGFW that is powered by Machine Learning (ML) |
| Product Family | Palo Alto Networks PA-800 Series Firewalls |
| Product Type | Firewall |
| Key Features: | SD-WAN functionality Central management with Panorama Firewall throughput (HTTP/appmix): 2.0/1.9 Gbps |
| Advanced Features | Advanced Threat Prevention Advanced WildFire Advanced URL Filtering DNS Security Enterprise DLP SaaS Security IoT Security |
Specifications
| Specifications | Palo Alto PAN-PA-850 Firewall |
| Firewall throughput (HTTP/appmix)* | 2.0/1.9 Gbps |
| Threat Prevention throughput (HTTP/appmix)† | 1.0/1.0 Gbps |
| IPsec VPN throughput‡ | 1.8 Gbps |
| Max concurrent sessions§ | 192.000 |
| New sessions per second|| | 13.100 |
| Notes: | Note: Results were measured on PAN-OS 11.0. * Firewall throughput is measured with App-ID and logging enabled, using 64 KB HTTP/appmix transactions. † Threat Prevention throughput is measured with App-ID, IPS, antivirus, antispyware, WildFire, DNS Security, file blocking, and logging enabled, utilizing 64 KB HTTP/appmix transactions. ‡ IPsec VPN throughput is measured with 64 KB HTTP transactions and logging enabled. § Max concurrent sessions are measured utilizing HTTP transactions. || New sessions per second is measured with application override utilizing 1 byte HTTP transactions. |
| Networking Features | |
| Interface Modes | L2, L3, tap, virtual wire (transparent mode) |
| Routing | OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing Policy-based forwarding Point-to-Point Protocol over Ethernet (PPPoE) Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 |
| SD-WAN | Path quality measurement (jitter, packet loss, latency) Initial path selection (PBF) Dynamic path change |
| IPv6 | L2, L3, tap, virtual wire (transparent mode) Features: App-ID, User-ID, Content-ID, WildFire, and SSL decryption SLAAC |
| IPsec and SSL VPN | Key exchange: manual key, IKEv1, and IKEv2 (preshared key, certificate-based authentication) Encryption: 3des, AES (128-bit, 192-bit, 256-bit) Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 GlobalProtect Large Scale VPN for simplified configuration and management (Requires GlobalProtect License.) Secure access over IPsec and SSL VPN tunnels using GlobalProtect Gateway and Portals (Requires GlobalProtect License.) |
| VLANs | 802.1Q VLAN tags per device/per interface: 4,094/4,094 Aggregate interfaces (802.3ad), LACP |
| Network Address Translation | NAT modes (IPv4): static IP, Dynamic IP, Dynamic IP and Port (port address translation) NAT64, NPTv6 Additional NAT features: Dynamic IP reservation, tunable Dynamic IP and Port oversubscription |
| High Availability | Modes: active/active, active/passive Failure detection: path monitoring, interface monitoring |
| Zero Touch Provisioning (ZTP) | Available with -ZTP SKUs (PA-220-ZTP) Requires Panorama 9.1.3 or higher |
| Hardware Specifications | |
| I/O | 10/100/1000 (4), Gigabit SFP (8) or 10/100/1000 (4), Gigabit SFP (4), 10 Gigabit SFP+ (4) |
| Management I/O | 10/100/1000 out-of-band management port (1) 10/100/1000 high availability (2) RJ-45 console port (1) USB port (1) Micro USB console port (1) |
| Storage Capacity | 240 GB SSD |
| Power Supply | PA-850: AC 450 W power supplies (2); one is redundant |
| Power Consumption | Maximum: 240 W Average: 64 W |
| Max BTU/hr | 256 |
| Input Voltage (Input Frequency) | 100–240 VAC (50–60 Hz) |
| Max Current Consumption | 2.0 A @ 100 VAC, 1.0 A @ 240 VAC |
| Max Inrush Current | 1.0 A @ 230 VAC, 1.84 A @ 120 VAC |
| Rack Mount (Dimensions) | 1U, 19” standard rack (1.75” H x 14” D x 17.125” W) |
| Weight (Standalone Device/As Shipped) | 1U, 19” standard rack (1.75” H x 14.5” D x 17.125” W |
| Safety | cTUVus, CB |
| EMI | FCC Class A, CE Class A, VCCI Class A |
| Environment | Operating temperature: 32°F to 104°F, 0°C to 40°C Nonoperating temperature: -4°F to 158°F, -20°C to 70°C |
| Airflow | Front to back |